Later a Windows computer starts up, each member of a specific group of programs on the reckoner is launched every bit before long as the user logs in to Windows. These "startup items" range from 3rd-party programs installed by the user that are configured to launch at startup to built-in Windows programs that the system needs to exist running when information technology boots up. Windows is an Operating System that hands over complete control of a reckoner to its user. That being the example, Windows users besides accept authority over what programs start running at startup and which ones practice non.

Windows users sometimes demand to end sure programs from running at startup for a wide variety of reasons (from the target program being malicious or otherwise dangerous to the target program eating upwards a lot of estimator resource after information technology is launched at startup to everything in between). Thankfully, preventing a plan from running at startup on a computer running on Windows 7 is fairly easy. Withal, at that place are 3 dissimilar methods a Windows 7 user can go almost preventing a program or application on their reckoner from running at startup.

These three methods are also to be used in succession until ane of these methods manages to fulfill the objective. For example, if the commencement method doesn't work, only then should y'all motion on to the 2nd method and and so the third method until y'all successfully prevent the target program from running at startup. The following are the three methods being talked virtually:

Method ane: Deleting the program's shortcut from the Startup binder

Most third-party programs that are configured to launch at startup have a shortcut in theStartupfolder of a Windows figurer. Deleting this shortcut from theStartupfolder results in Windows not launching the plan at boot. On Windows 7, here'southward what you demand to practice in order to delete a plan's shortcut from theStartupfolder to forestall it from running at startup:

  1. Open theShowtime Menu.
  2. Click onAll Programs.
  3. Locate and click on theStartupfolder to aggrandize information technology.
  4. Wait for a shortcut to your target program or application under theStartupfolder. Once yous locate the shortcut, right-click on it and click onDelete.
  5. Confirm the action in the resulting popup.
  6. Restartyour calculator and check to make sure the plan doesn't launch when the reckoner boots upward.

Method 2: Disable the startup item in Organisation Configuration

If deleting the target program's shortcut from theStartupfolder doesn't piece of work or if you notice that a shortcut for the target program doesn't even exist in your computer'due southStartupfolder, fear non – it is even so entirely possible for you to disable the target program or "startup item" fromSystem Configuration.Arrangement Configurationis a Windows utility designed to let users to configure how their computer starts upward and shuts down, among an assortment of other things. To disable the target "startup detail" inOrganisation Configurationto forestall the target program from existence launched at startup, you need to:

  1. Press theWindows Logokey +R to open aRundialog.
  2. Blazonmsconfiginto theRundialog and pressEnterto launch theSystem Configurationutility.
  3. Navigate to theStartuptab of theOrganization Configurationutility.
  4. Locate the program Windows from launching when your computer starts upward, anddisableit past unchecking the checkbox located directly adjacent to information technology.
  5. Click onApplyand then onOK.
  6. Click onRestartin the resulting dialog box.
  7. When the calculator boots upwards, check to brand certain Windows doesn't launch the plan you just disabled inSystem Configuration.

Method 3: Prevent the offending program from launching at startup using the Registry

Autonomously from theStartupbinder on your estimator andOrganization Configuration, theRegistryalso has the ability to get Windows to launch certain programs at the startup. That beingness the case, yous can merely prevent some programs from launching at startup if you do and so via the Registryon your reckoner. Make certain to support your Registry before trying to edit it in case something goes wrong. To prevent a programme from being launched at startup using the Registry, simply:

  1. Start the registry editor.
  2. Printing theWindows Logoprimal +R to open up aRundialog.
  3. Blazonregeditinto theRundialog and pressEnter to launch theRegistry Editor.
  4. In the left pane of theRegistry Editor, navigate to the following directory: 
    HKEY LOCAL Machine > SOFTWARE > Microsoft> Windows > CurrentVersion
  5. In the left pane of the Registry Editor, click on theRunsub-key under theCurrentVersionkey to have its contents displayed in the right pane.
  6. In the right pane of theRegistry Editor, yous are going to see listings for all of the programs on your computer that are configured to be launched at startup through theRegistry. Locate the listing for the program y'all desire to prevent Windows from launching at startup, correct-click on it and click onDelete.
  7. Ostend the action in the resulting popup.
  8. Close theRegistry Editor.
  9. Restartyour computer. At startup, check to ensure that Windows does not automatically launch the program you butdisabledfrom being launched at startup.

Note: Deleting a program or awarding's entry from theRunsub-primal in theRegistry Editoronly prevents the plan from being launched at startup – it does NOTuninstallthe program from your calculator.

Method 4: Adjusting in MSConfig

It is possible in some cases that the plan that y'all are trying to end from running or launching at your figurer's startup has as well installed a service on your figurer that automatically overrides whatsoever restrictions that y'all implement and allows the program to be launched at the startup. Therefore, in this pace, we will be adjusting this in the MSConfig window. For that:

  1. Press "Windows" + "R" to open the Run prompt.
  2. Blazon in "MSConfig" and press "Enter" to open the Microsoft Configuration Window.
    msconfig
  3. In the Configuration Window, click on the "Services" panel and curl through the listing of mentioned services.
  4. From this, try to disable a service that seems relevant to the application that y'all are trying to disable.
  5. Afterwards doing so, hit the "Apply" button to ostend that the service is disabled.
  6. Cheque to run into if the program still launches.

Method 5: Delete Registry Startup

In some isolated cases, in that location is another registry where the program that is launching at startup might have manifested its startup command. This registry entry can sometimes contain the control to launch a particular awarding at startup and in this step, we volition exist getting rid of the entry to make sure that the awarding isn't launched. In guild to exercise then, make sure to dorsum upwardly the registry beforehand in example something goes due south.

  1. Printing "Windows" + " "R" on your keyboard to open the Run prompt.
  2. Inside the Run prompt, type in "Regedit" and printing "Enter" to launch the registry editor.
    Open Regedit
  3. In the Registry Editor, navigate to the below mentioned location. 
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupreg
  4. From here, on the right side, you should see a registry entry for any programs that are currently enabled to run on your figurer's startup.
  5. Right-click on their entries and select the "Delete" button to remove them from your computer.
  6. Check to run into if doing then has fixed the result.

Method 6: Disable Startup Programs Using CCleaner

Sometimes, your computer's configurations might be and so messed upwards that in spite of trying all the fixes above, you would not exist able to disable the program that you lot desire from launching at startup. Therefore, sometimes, yous will have to go for a third-party solution to completely forestall whatsoever programme from launching at your computer'southward startup. In order to do so, follow the guide below.

  1. First of all, what you want to do is launch your favorite browser and download the CCleaner program from here.
  2. Later on downloading this tool, make sure to printing the executable icon and follow through with the on-screen instructions to install it on your computer.
  3. After the installation process is completed, launch the application on your computer.
  4. After the application has been started, click on the "Tools" push at the left side of the dialogue box and select the "Startup" button afterward that.
  5. The "Enabled" column on the left should exist list the programs that are currently enabled to launch at your computer's startup.
    Clicking on the enabled column
  6. Click on the program that you lot want to disable from the listing and then click on the "Disable" button to prevent it from launching at startup.
  7. Afterwards disabling all the preferred programs, restart your computer to make sure that the change takes event.
  8. Check to see if by doing and so you lot have been able to disable the programs.

Method vii: Cheque Awarding Settings

In some cases, nosotros have seen that the application in question is configured to launch at startup through its ain settings. This option is normally presented when you lot first install the awarding and if you don't change the default "Launch at Startup" option, the awarding becomes configured to launch at startup. Due to this, even though you are trying to prevent information technology from starting by irresolute the computer configurations, it will still override these settings to accommodate to your preference. Therefore, a wise workaround to this would be to bank check your awarding settings in detail to disable whatever launch at startup setting.

Method 8: Using Selective Startup

Some users were going through the issue that their computer was unable to function and they were unable to motion even the cursor when the calculator was starting up because a item application was breaking downwardly the operating arrangement and causing information technology to hang up. Therefore, in this step, we will exist booting the computer into a selective startup way and this style, y'all will be able to properly diagnose which application is causing this issue and then disable information technology from launching at startup. For that:

  1. Press "Windows' + "R' to open the Run prompt.
  2. Type in "msconfig" and printing "enter" to launch the Microsoft Configuration panel.
    msconfig
  3. Inside this panel, click on the "Kick" option, and from here brand certain to check the "Safe Kick" option and after that, select the "Minimal" button.
    Bank check Safe Mode in Boot Tab
  4. Click on the "Apply" button to save your changes and then click on the "OK" button to exit out of the window.
  5. Restart your computer to actually boot into the selective startup mode.
  6. This mode won't allow any extra application to starting time up and you should be able to hands diagnose and prepare your computer.
  7. Check to see if doing so has stock-still your issue.

Note: Nosotros don't recommend leaving your computer in selective startup, because this tin can return portions of your security software or other applications unavailable. One time y'all have determined which program is causing the trouble, you should check the programme'southward documentation or help site to see if the program can be configured to avert the conflict.

Method 9: Disable Startup Programs Using iSumSoft System Refixer

Once once more, if you are unable to perform any of the steps that nosotros have mentioned below, a convenient and decent approach would exist to use the iSumSoft Arrangement Refixer tool to really go through this whole ordeal for you lot. In order to demonstrate this, we have listed the steps below.

  1. Launch your favorite browser and download the iSumsoft Arrangement Refixer on your reckoner from here.
  2. Afterward the download is finished, click on the executable to launch its installer and follow the on-screen instructions to install it on your computer.
  3. Select the Startup option on the top of this tool and it volition display a list of all the programs that have been configured to launch at startup on your computer.
    Clicking on the "Startup" tab
  4. Click the 'Disable showtime' button to disable your unwanted startup programs.
  5. Save your settings and check to meet if doing so has gotten rid of your issue.

Method x: Disable Startup Application Using Shift Primal

If y'all aren't comfortable with any tertiary-political party applications and actually want to perform these steps conveniently at the press of a push button, you tin can just press and concur the Shift cardinal during the startup process of the estimator. This will prevent whatever programs from existence able to run after the startup.

On some computers, you lot need to printing and hold the shift key while restarting your computer to really launch information technology without having whatsoever startup programs enabled so brand sure that yous try both these methods and run into which one works the best for yous.

  • %SystemDrive%\Users\username\AppData\Roaming\Microsoft\Windows\Start Carte du jour\Programs\Startup
  • %SystemDrive%\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup

As we discussed above, the folders above contain the list of the programs that are to exist launched at the startup of the computer and whenever the user cues the startup, the arrangement goes into these locations to check for the list just when you press the Shift key, this process is skipped and y'all are able to bypass that list. In society to do this:

  1. Log off the reckoner and then log on over again, Immediately press and hold down the Shift key every bit the calculator starts.
  2. Continue to concur down the Shift cardinal until the desktop icons announced.
  3. Next, you should use the System Configuration utility to temporarily disable applications ane by one until you place the crusade of the problem.
  4. With the cause of the problem identified, you tin can gear up the application or permanently remove it from your startup programs.
  5. Check to run across if this method works and yous are able to forestall the app from starting.